CPU |
- Built in with an Intel® Quad-Core Celeron® N3160 SoC (1.6 GHz)
* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.
- 2 MB Cache
|
Memory |
- 2 x DDR3L SO-DIMM sockets supporting up to 8 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
- Dual channel memory architecture
- Support for DDR3L 1600 MHz memory modules
* Due to an SoC limitation, if a 1333 MHz memory is installed, it will be downgraded to 1066 MHz.
- Support for non-ECC memory modules
(Please refer "Memory Support List" for more information.) |
Onboard Graphics |
Integrated in the SoC:
- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
- 1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz
Maximum shared memory of 512 MB |
Audio |
- Realtek® ALC887 codec
- High Definition Audio
- 2/4/5.1-channel
|
LAN |
- 2 x Realtek® GbE LAN chips (10/100/1000 Mbit)
* Teaming is not supported.
|
Expansion Slots |
- 1 x PCI Express x1 slot, running at x1
- 1 x half size Mini PCIe slot (MPCIE1)
(The PCI Express x1 and Mini PCIe slots conform to PCI Express 2.0 standard.)
|
Storage Interface |
Chipset:
- 2 x SATA 6Gb/s connectors
- 1 x MSATA connector (MSATA_MPCIE2)
|
USB |
Chipset:
- 4 x USB 3.0/2.0 ports on the back panel
- 4 x USB 2.0/1.1 ports available through the internal USB headers
|
Internal I/O Connectors |
- 1 x 4-pin ATX 12V power connector
- 1 x CPU fan header
- 1 x system fan header
- 2 x SATA 6Gb/s connectors
- 1 x MSATA connector (MSATA_MPCIE2)
- 1 x SATA power connector
- 1 x front panel header
- 1 x front panel audio header
- 1 x battery cable header
- 2 x USB 2.0/1.1 headers
- 6 x serial port headers
- 6 x serial port power select jumpers
- 1 x D-Sub header
- 1 x digital microphone header
- 1 x LVDS header
- 1 x LVDS drive voltage jumper
- 1 x flat panel display header
- 1 x flat panel display power jumper
- 1 x flat panel display switch header
- 1 x backlight switch header
- 1 x speaker header
- 1 x buzzer header
- 1 x chassis intrusion header
- 1 x LPT/GPIO header
- 1 x volume control header
- 1 x LPT configuration jumper
- 1 x GPIO power selection jumper
- 1 x GPIO status configuration jumper
- 1 x jumpers for switching USB signals
- 1 x Clear CMOS jumper
|
Back Panel Connectors |
- 1 x DC In power connector
- 1 x HDMI port
- 1 x D-Sub port
- 4 x USB 3.0/2.0 ports
- 2 x RJ-45 ports
- 2 x audio jacks (Line Out, Mic In)
|
I/O Controller |
- iTE® I/O Controller Chip
|
H/W Monitoring |
- System voltage detection
- CPU/System temperature detection
- CPU/System fan speed detection
|
BIOS |
- 2 x 64 Mbit flash
- Use of licensed AMI UEFI BIOS
- Support for DualBIOS™
- PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
|
Unique Features |
- Support for Xpress Install
- Support for @BIOS
- Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications
|
Bundle Software |
- Norton® Internet Security (OEM version)
|
Operating System |
- Support for Windows 10/8.1/7 64-bit
* Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.
|
Form Factor |
- Thin Mini-ITX Form Factor; 17.0cm x 17.0cm
|
Remark |
- Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
- Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.
|