Продуктът не се предлага в момента
Попитайте за дата на доставка:
(+359 2) 965 89 89
Цени за доставка:
Условия и срокове за доставка:
Intelligent Call-Routing Gateway for VoIP
Highlights
• Enables high-quality, feature-rich voice-over-IP service through your broadband Internet connection
• Two standard phone ports: one for use with an analog telephone or fax machine and one for an analog FXO connection from your local service provider
• High-quality, clear-sounding voice service with advanced quality-of-service capability
• Compatible with common telephone features, such as caller ID, call waiting, call forwarding, and voicemail
Figure 1. Cisco SPA3102 Phone Adapter with Router

Product Overview
Features
Telephony Features
• Service authentication via PIN, digest, and caller ID (Bellcore Type 1)
• Per-call authentication and associated routing
• Support for least-cost routing
• Impedance agnostics: eight settings
• Call waiting, cancel call waiting, call waiting caller ID detection (Bellcore Type 1)
• Caller ID with name and number (multinational variants)
• Caller ID blocking
• Call forwarding to PSTN or VoIP service: no answer, busy, all
• Do not disturb
• Call transfer
• Three-way conference calling with local mixing
• Message waiting indication - visual and tone based
• Call return
• Call back on busy
• Call blocking with toll restriction
• Delayed disconnect
• Distinctive ringing - calling and called number
• Off-hook warning tone
• Selective/anonymous call rejection
• Hot line and warm line calling
• Speed dialing of eight numbers/addresses
• Music on hold
• Fax: G.711 pass-through or real-time fax over IP via T.38
Product-Specific Features
• VoIP to PSTN (USA) service call origination and termination
• PSTN (USA) to VoIP service call origination and termination
• Single-stage and two-stage dialing
• Forward calls to VoIP service - selective, authenticated, all
• Forward calls to PSTN service - selective, authenticated, all
• PSTN line sharing with multiple extensions
• Automatic PSTN fallback (loss of power or IP service to unit - with quiescence to normal operations)
• Advanced inbound and outbound call routing
• Independent configurable dial plans - up to eight
• Force PSTN disconnection
• Sequential dialing support
VoIP to PSTN Authentication and Routing Features
• VoIP to PSTN gateway enable/disable
• VoIP caller authorization method (none, PIN, HTTP digest)
• VoIP PIN max retry setting
• One-stage dialing enable/disable
• VoIP caller ID pattern matching
• VoIP access allowed caller list (no further authentication)
• VoIP caller PIN and associated dial plan
PSTN to VoIP Authentication and Features
• PSTN to VoIP gateway enable/disable
• VoIP caller authorization method (none, PIN, HTTP digest)
• Ring through to FXS enable/disable
• Ring-through tone - configurable
• Caller ID (Bellcore Type 1) for VoIP service access
• Caller ID enable/disable
• PIN max retry settings
• Access allowed caller list (no further authentication)
• Caller PIN and associated dial plan
• Least-cost routing (via outbound VoIP - Line1 dial plan)
FXO Behavior Features
• VoIP answer delay timer
• PSTN answer delay timer
• VoIP PIN digit time-out timer
• PSTN PIN digit time-out timer
• PSTN to VoIP call max duration timer
• VoIP to PSTN call max duration timer
• PSTN ring-through delay timer
• PSTN dialing delay timer
• VoIP DIG refresh interval timer
• PSTN ring time-out timer
PSTN Disconnection Detection Features
• CPC (removal of tip/ring voltage momentarily)
• Polarity reversal
• Long silence (configurable time setting)
• Disconnect tone (such as reorder tone)
• Silence threshold
International Control Features
• FXO port impedance - configurable to 16 settings
• Ring frequency - configurable
• SPA to PSTN and PSTN to SPA gain settings
• Ring frequency - maximum setting
• Ring validation time setting
• Tip/ring voltage adjustment setting
• Ring indication delay setting
• Operational loop current minimum value
• Ring time-out setting
• On-hook speed setting
• Ringer impedance setting
• Line-in-use voltage setting
Specifications
Table 1. Specifications for the Cisco SPA3102 Phone Adapter with Router
Specifications |
|
Data networking |
• MAC address (IEEE 802.3)
• IPv4 (RFC 791) upgradeable to v6 (RFC 1883)
• Address Resolution Protocol (ARP)
• DNS A record (RFC 1706), SRV record (RFC 2782)
• Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)
• DHCP server (RFC 2131)
• Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516)
• Internet Control Message Protocol (ICMP) (RFC 792)
• TCP (RFC 793)
• User Datagram Protocol (UDP( (RFC 768)
• Real Time Protocol (RTP) (RFC 1889, 1890)
• Real Time Control Protocol (RTCP) (RFC 1889)
• Differentiated Services (DiffServ) (RFC 2475), type of service (ToS) (RFC 791, 1349)
• VLAN tagging 802.1p
• Simple Network Time Protocol (SNTP) (RFC 2030)
• Upload data rate limiting - static and automatic
• Quality of service (QoS) - voice packet prioritization over other packet types
• Router or bridge mode of operation
• MAC address cloning
• Port forwarding
|
Voice gateway |
• Session Initiation Protocol (SIP) v2 (RFC 3261, 3262, 3263, 3264)
• SIP proxy redundancy - dynamic via DNS SRV, A records
• Reregistration with primary SIP proxy server
• SIP support in Network Address Translation (NAT) networks (including Serial Tunnel [STUN])
• Secure (encrypted) calling via prestandard implementation of Secure RTP
• Codec name assignment
|
Voice algorithms |
• G.711 (A-law and μ-law)
• G.726 (16/24/32/40 kbps)
• G.729 A
• G.723.1 (6.3 kbps, 5.3 kbps)
• Dynamic payload
• Adjustable audio frames per packet
|
Fax capability |
• Fax tone detection and pass-through (using G.711)
• Fax pass-though (using G.711)
• Dual-tone multifrequency (DTMF): in-band and out-of-band (RFC 2833) (SIP info)
• Flexible dial plan support with interdigit timers and IP dialing
• Call progress tone generation
• Jitter buffer - adaptive
• Frame loss concealment
• Full-duplex audio
• Echo cancellation (G.165/G.168)
• Voice activity detection (VAD) with silence suppression
• Attenuation/gain adjustments
• Flash hook timer
• Message waiting indicator (MWI) tones
• Visual MWI (VMWI) via frequency shift keying (FSK)
• Polarity control
• Hook flash event signaling
• Caller ID generation (name and number) - Bellcore, DTMF, European Telecommunications Standards Institute (ETSI)
• Music on hold client
• Streaming audio server - up to 10 sessions
|
Security |
• Password-protected system reset to factory default
• Password-protected administrator and user access authority
• Provisioning/configuration/authentication:
• HTTPS with factory-installed client certificate
• HTTP digest - encrypted authentication via MD5 (RFC 1321)
• Up to 256-bit Advanced Encryption Standard (AES) encryption
|
Provisioning, administration, and maintenance |
• Web browser administration and configuration via integrated web server
• Telephone keypad configuration with interactive voice prompts
• Automated provisioning and upgrade via HTTP, Trivial File Transfer Protocol (TFTP)
• Asynchronous notification of upgrade availability via SIP NOTIFY
• Nonintrusive, in-service upgrades
• Report generation and event logging
&bull
Ако притежавате този продукт и имате впечатления за него, моля споделете ги! Задайте своя въпрос относно Cisco SPA3102-EU Phone Adapter with Router *Моля, напишете своя телефон или имейл адрес, ако желаете да се свържем с Вас
Клиентите за нас
gosho goshev Супер професионалисти! Имах проблем с настолен компютър, бях на 90% сигурен, че е проблем със захранването. Техника го погледна (веднага) и каза Nikola Kamenarov Стархотен персонал, сервиз и магазин.
Бързи и отговорни с поръчки.
Препоръчвам! Иво Иванов Ако има някакви останали фирми, които си гледат работата както трябва е тази е. Първо, че техниката им е доста . Второ консултацията, която колежка... Teodor Zaynelov Страхотен онлайн магазин! Цените са отлични, има голямо разнообразие от продукти, а персоналът е много компетентен и винаги готов да помогне. Бърза... Kamen Stoychev Много качествени продукти на супер цени, но се бавят с потвърждението за поръчките от онлайн магазина им. Нагоре
|