Matrox Veos Master Unit, Up to 1080p or 1920x1200, RG6 or RG11 (BNC) coaxial, MTR-VEOS VS-MSTR-0F

More content. Greater distance. Guaranteed.

Connect one Master to the PC and broadcast three channels of digital video content over 100 meters (330 feet) on a single RG6 or RG11 coax cable. Attach any number Display and/or Repeater units to extend the distance over another 100 meters (330 feet) with each component without compromising image quality.

Drive up to three channels to play multiple messages concurrently from a single computer—using just one cable
Digital extension ensures zero image quality loss and guarantees your distance
Daisy-chain an unlimited number of Veos components—at over 100m intervals—to drive digital signage across an installation without compromising quality
Display your content at high resolution - up to 1080p or 1920x1200
Wide and stable resolution support (16:9 / 16:10 / 4:3) at any distance
Landscape and pivot display orientation support for increased flexibility*
LED indicator installation feature allows you to verify the signal being received and generated at each component without your PC having to be on or even attached
Manage displays at a distance using RS-232 simplex
Fanless design with no moving parts ensures long product life
Hot swappable device-remove and replace the unit without shutting down or rebooting the PC

* Default single channel resolution. Other specified resolutions can be set using PowerDesk.

Maximum resolution¹: Up to 1080p or 1920x1200;

Cable specification: RG6 or RG11 (BNC) coaxial such as Belden 1694A (not included) Click for a complete list of supported coaxial cables. Other coax cables may work with Veos, but distance cannot be guaranteed.
RS-232 Serial DB-9 (not included)*

*An RS-232 DB-9 serial cable that connects from your PC to your Master unit is only required if simplex RS-232 is desired.

Minimum system requirements: DVI or VGA output connector on a compatible system
Available USB connector
Display driver supporting 800x600
Operating systems supported
Microsoft Windows® 2K, XP, XP x64, Vista and Vista x64.

Installation: Veos components are all external to your PC. Setup is as easy as 1,2,3. Once the hardware has been connected properly, LED indicator lights will validate the install. After the PowerDesk software has been installed, you are ready to set up your content. Only one Master unit is required in any Veos install - a minimum of at least one Display Unit is required to complete the extension.

Distance generated: Greater than 100 meters

Part #: VS-MSTR-0F

Dimensions: 6.63" (Width) x 5.19" (Depth) x 1.25" (Height)

16.84 cm (Width) x 13.18 cm (Depth) x 3.18 cm (Height)
 

Weight: 315g

Connectors: One DVI input
One HD15 VGA input
One serial input (DB-9)
One coax output (BNC)
One USB input

Other feature: LED power/signal indicator

MTBF: Over ten years including power supply - contact Matrox for more details.

Power supply: 5 volt, 3 amp

Certifications: EMC
Class A: FCC, CE, VCCI, ACMA
Safety
C-UL-us
GS-TUV
S-Mark Argentina
PSE Japan
CCC China
K-Mark Korea
N-Mark Australia

Hardware included: Veos Master unit
One DVI-DVI 2' cable (PC to Master)
One HD15-HD15 2' VGA cable (PC to Master)
External 5VDC, 3A power supply + Two Power cords (US & EU) / USB cable
Two power plug adaptors (UK & AUS/NZ)
Quick Install guide