Продукти Производители Промоции Разпродажба Конфигуратор Лизинг Сервиз за компютри Контакти
Влез в
профила си
0 бр.
0.00 лв.

SSD Team Group 256GB MP32, PCI Express 3 x2 with NVMe 1.3, M.2 2280

Продуктов код: 29821
SSD Team Group
SSD Team Group
Все още няма оценка за продукта.
Напиши ревю | Задай въпрос
Производител:
Team Group
Модел:
MP32
Партиден номер:
-
Гаранция:
36 месеца
Form Factor:
M.2 2280
SSD - интерфейс:
PCIe
SSD- обем:
256 GB

Продуктът не се предлага в момента

Попитайте за дата на доставка:
(+359 2) 965 89 89

  • Описание
  • Ревюта
  • Въпроси и отговори

Team Group MP32

FEATURES
  • Ultra read/write speed
  • Support NVMe specification
  • Supports S.M.A.R.T.
  • Supports TRIM

 

  • High speed and excellent performance

    High speed and excellent performance

    The M.2 PCIe SSD launched by Team Group, the MP32 uses high speed PCIe Gen3x2 interface. The maximum read/write speed is up to 1500/800 MB/s, offering more than 2 times better performance than the SATA III. The MP32 M.2 PCIe SSD is capable to reduce operating delays of the operating system and game/software, and delivers the finest and smoothest gaming experience and an extreme high speed performance without any lag even reading/writing large amounts of game data, complex 3D graphics and motion processing algorithms with fancy special effects, or loading heavy duty video/graphics editing software. The M.2 PCIe SSD is especially suitable for professional groups like PC DIY enthusiasts, gamers, overclocking enthusiasts, graphic designers, etc.

  • Support NVMe standard solid state drive

    The MP32 M.2 PCIe SSD supports the NVMe 1.3 specification. The system communicates with it through PCIe bus and connects to the built-in PCIe controller of the chipset or processor, so the signal transfer is as simple and precise as point to point. The MP32 M.2 PCIe SSD offers you a pleasant high-performance transfer experience, without a bit of lag or delay.

    Support NVMe standard solid state drive
  • Transfer speed is 2 times higher than the SATA III interface

    Transfer speed is 2 times higher than the SATA III interface

    The transfer speed of traditional solid state drive is limited within the bandwidth of SATA interface, therefore consumers have gradually shifted to PCIe interface, which is capable of offering higher transfer speed. The MP32 M.2 PCIe SSD uses PCIe Gen3 x2 high speed transfer interface. With the support of PCIe bus bandwidth, it can offer consumers a stable transfer speed of at least 1300MB/s, or up to over 1600MB/s. The transfer speed is 2 times higher than the SATA III interface and allows consumers to enjoy the high-speed multimedia entertainment experience.

  • Smart algorithm management mechanism

    The MP32 M.2 PCIe SSD supports S.M.A.R.T function and its built-in smart algorithm management mechanism has functions such as GC (garbage collection) and TRIM command which are able to ensure operation efficiency, prolong the service life of the SSD and bring it to its maximum performance. Meanwhile, the powerful Wear-Leveling technology and ECC (Error Correction Code) function improve the accuracy and reliability of data transfer.

    Smart algorithm management mechanism

     

    Model MP32 M.2 PCIe SSD
    Interface

    PCIe 3.0 x2 with NVMe 1.3
    Capacity

    128GB / 256GB / 512GB / 1TB[1]
    Voltage

    DC +3.3V
    Operation Temperature

    0˚C ~ 70˚C
    Storage Temperature

    -40˚C ~ 80˚C
    Terabyte Written

    128GB / >100TB
    256GB / >200TB
    512GB / >400TB
    1TB / >800TB[2]
    Performance Crystal Disk Mark:
    128GB Read/Write: up to 1350/400 MB/s
    256GB Read/Write: up to 1500/800 MB/s
    512GB Read/Write: up to 1500/850 MB/s
    1TB Read/Write: up to 1550/950 MB/s[3]
    Weight 12g
    Dimensions 80(L) x 22(W) x 2.3(H) mm
    Humidity RH 90% under 40°C (operational)
    Vibration 80Hz~2,000Hz/20G
    Shock 1,500G/0.5ms
    MTBF 1,500,000 hours
    Operating System System Requirements:
    • Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista[4]
    • Linux 2.6.33 or later
    Precautions
    [1] 1GB=1,000,000,000 Bytes. In OS system, it would be displayed as 1,000,000,000 Bytes/1024/1024/1024 = 0.93GB
    [2] Definition and conditions of TBW (Terabytes Written)are based on JEDEC standard
    [3] Transmission speed will vary according to different hardware/software conditions, therefore the data can only use for basic reference.
    [4] PCIe SSD works best under WIN8.1 and WIN10 operating system. Windows Operating Systems earlier than Windows 8.1 does not support NVMe Driver natively. Users will need to install NVMe Driver prior installing the SSD.

Ако притежавате този продукт и имате впечатления за него, моля споделете ги!

Задайте своя въпрос относно Team Group 256GB MP32, PCI Express 3 x2 with NVMe 1.3, M.2 2280

(не се публикува)
(не се публикува)

*Моля, напишете своя телефон или имейл адрес, ако желаете да се свържем с Вас
Продукти, подобни на Team Group 256GB MP32, PCI Express 3 x2 with NVMe 1.3, M.2 2280

виж всички ssd (solid state drive)

Нагоре