- Compliant with IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ab
- Store & forward, share memory, non-blocking architecture
- Supports MAC address self-learning and auto MDI/MDIX
- Provide 24 10/100Mbps+2 10/100/1000Mbps auto-negotiation ports
- Provide 2 1000Mbps SFP Slots (Combo)
- Supports full-deplux 802.3x flow control and half-duplux backpressure flow control
- Supports 16K MAC address list, MAC address learning and auto-ageing
- Supports Uplink ports Inductive Lightning Protection up to 6KV
- Supports power supply Inductive Lightning Protection up to 6KV
- Supports loop detection and prevention
- Supports 3 modes for different networks
- Fanless design
- Desktop 、wall-mount and rack-mount Design
| Hardware | |
|---|---|
| Model | F1026F |
| Standard | IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab |
| Intertface | 24*10/100M+2*10/100/1000M auto-negotiation RJ45 ports (Auto MDI/MDIX) 2*1000M SFP solts (Combo) |
| Transmission media | 10Base-T: Cat. 3 UTP or better, 100Base-TX: Cat.5 UTP or better 1000Base-T: Cat.5e UTP or better, 1000BASE-X: MMF, SMF |
| Forwarding rate | 10 Mbps: 14880 pps 100 Mbps: 148800 pps 1000 Mbps: 1488000 pps |
| Power Supply | Input: AC:100-240V; 50/60Hz |
| Lightning protection | 6kV in Common Mode Protection for 2*GE ports 6kV in Common Mode, 4kV in Di erential Mode Protection for power supply |
| Dimension | 440mm *178mm *44mm(L * W * H) |
| LED indicato | 1* Power, 26* Link/Act, 3*mode status lights |
| Switching capacity | 8.8Gbps |
| MAC address table | 16K |
| Power consumption | Maximum : 12W (220V) |
| Software | |
| Store-and-forward | Supported |
| Protocol | CDMA/CD |
| Mode | M1: Standard mode, the default mode of the switch. In that mode, all ports can communicate with each other. M2: Port-based priority mode, ports 1 to 8 have higher priority than other ports, and all ports can communicate with each other. M3: Port-based VLAN mode, ports 1 to 24 can communicate with uplink ports (ports 25 and 26) but cannot communicate with each other. |
| MAC address learning | Auto learning & auto aging |
| Loop Guard | Support Hardware Auto loop protection and prevention in M1 |
| Others | |
| Temperature | Operating temperature: (0 - 40)°C Storage temperature: (-40 - 70)°C |
| Humidity | Operating humidity: (10% - 90%) RH, non-condensing Storage humidity: (5% - 90%) % RH, non-condensing |
| Certification | CCC, CE, FCC, RoHS |
