Все още няма оценка за продукта.Продуктът не се предлага в момента
Попитайте за дата на доставка:
(+359 2) 965 89 89
Цени за доставка:
Условия и срокове за доставка:
In a world of expanding enterprises and growing virtualization, cloud-based services and applications, like VoIP, HD streaming video, and IP surveillance, SMB networks need to evolve beyond simple reliability to provide increased scalability, higher bandwidth, and enhanced performance. TP-LINK’s new T1700 Series 10G Smart Switches represent an ideal solution that meets these requirements. The series includes the T1700X-16TS Full 10-Gigabit Smart Switch and the T1700G-28TQ Gigabit Stackable Smart Switch with 10G Uplink, which both provide high levels of performance, scalability, and cost-effectiveness that SMBs require from their 10G networking solutions.
24-Port Gigabit Stackable Smart Switch
with 4 10GE SFP+ Slots
With True Physical Stacking Technology, up to six T1700G-28TQ units can be stacked with a single IP address.
This provides enhanced scalability, simple management, and increased redundancy for high-density deployment. It also supports efficient network expansion in the future.
True Physical Stacking Technology of up to six units supports network simplification
Up to 144 Gigabit Ethernet ports per stack
Up to 24 10G SFP+ slots per stack
Up to 768Gbps of switching capacity for aggregated networks
With all units identified by a single IP address, configuring and monitoring the stack is easy
The T1700G-28TQ utilizes a fanless design, which reduces the amount of ambient noise in your office. Removing the fan also reduces power consumption and helps you build a more cost-effective network.
Simple network segmentation, with internal routing through the switch, allows devices in different VLANs/subnets to communicate with each other and makes the flow of network traffic more efficient.
T1700 Series devices are equipped with a full lineup of L2 features that meet your current and future needs for unified networking and mobility.
802.1Q/MAC/Protocol/Private VLAN1
Link Aggregation Group (LAG)
IGMP & MLD Snooping
Multicast VLAN
Support for numerous security strategies allow you to create a secure, unified network by preventing unauthorized access, external attacks, and malware infiltration.
Access Control List (ACL)
DHCP Snooping
802.1x Authentication
IP-MAC-Port Binding
Advanced controls provide optimized network performance and efficient delivery of time-sensitive traffic.
Port-Based or 802.1p-Based Prioritization
Layer 3-Based (DSCP) Prioritization
Rate Limit
Voice VLAN
The T1700 Series offers comprehensive IPv6 features, including IPv6 management, Static Routing, ACL, and QoS2, which ease the transition to an IPv6-based network and protect the value of your investment.
Dual image firmware reduces downtime when the firmware is being updated. The backup image will also be activated in the event that any error occurs on the active image.
1 Only T1700X-16TS supports Private VLAN
2 IPv6 Static Routing/ACL/QoS will be supported in a future firmware release
| T1700X-16TS | T1700G-28TQ | |
|---|---|---|
| 10/100/1000Mbps RJ45 Ports | - | 24 |
| 10GBase-T RJ45 Ports | 12 | - |
| Uplink | 4 Dedicated 10G SFP+ | 4 Dedicated 10G SFP+ |
| Switching Capacity | 320Gbps | 128Gbps |
| Dimensions(W×D×H) | 17.3×8.7×1.73 in. (440×220×44mm) |
17.3×7.1×1.73 in. (440×180×44mm) |
| Fan Quatity | Two Smart Fans | Fanless |
| Find More Details | Go> | Go> |
Physical Stacking
Up to 6 units Physical Stacking
Up to 40Gbps bi-directional stacking bandwidth
Ring Stacking for Link Redundancy
Distributed Link Aggregation
L2 and L2+ Features
Static Routing
Link Aggregation Control Protocol (LACP)
802.1Q/MAC/Protocol VLAN
STP/RSTP/MSTP
IGMP Snooping
Security Strategies
Port Security
Access Control List (L2~L4 ACL)
DHCP Snooping
IP-MAC-Port Binding
802.1x and Radius Authentication
SSL and SSH encryptions
Strom Control
Dos Defend
Quality of Service
8 priority queues
802.1P/DSCP QoS
Rate Limit
Voice VLAN
Management
Web-based GUI
Command Line Interface (through Telnet)
SNMP v1/v2c/v3
RMON (1, 2, 3, 9 group)
IPv6 Management
Dual Image
| HARDWARE FEATURES | |
| Standards and Protocols | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ae, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p |
| Interface | 24 10/100/1000Mbps RJ45 Ports |
| 4 fixed 10G SFP+ Slots | |
| Network Media | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) |
| 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) | |
| 1000BASE-X: MMF, SMF | |
| 10GBASE-LR | |
| 10GBASE-SR | |
| Fan Quantity | Fanless |
| Power Supply | 100-240V, 50/60Hz |
| Power Consumption | 21.8W |
| Weight | 2.8kg |
| Dimensions ( W x D x H ) | 17.32 * 7.1 * 1.73 in. (440 * 180 * 44 mm) |
| PHYSICAL STACKING | |
| Installable SFP+ Transceivers and Direct Attach Copper (DAC) Cables | TXM431-SR |
| TXM432-LR | |
| TXC432-CU1M | |
| TXC432-CU3M | |
| Max Number of Stacking Ports Installable | 2 SFP+ |
| No. of Units Per Stack | Up to 6 units |
| Stacking Speed (Per Port) | 20Gbps (Full-Duplex) |
| PERFORMANCE | |
| Switching Capacity | Up to 128Gbps for a standalone switch |
| Packet Forwarding Rate | Up to 95.2Mpps for a standalone switch |
| MAC Address Table | 16K |
| Packet Buffer Memory | 1.5MB |
| Jumbo Frame | 9KB |
| Number of Static Routes | 32 IPv4 |
| Number of IP Interfaces | 16 |
| SOFTWARE FEATURES | |
| Quality of Service | Support 802.1p CoS/DSCP priority |
| Support 8 priority queues | |
| Queue scheduling: SP, WRR, SP+WRR | |
| Port/Flow- based Rate Limiting | |
| IPv6 QoS* | |
| Voice VLAN | |
| L2 and L2+ Features | Static Routing |
| DHCP Relay* | |
| IGMP Snooping V1/V2/V3 | |
| 802.3ad LACP (Up to 14 aggregation groups, containing 8 ports per group) | |
| Spanning Tree STP/RSTP/MSTP | |
| BPDU Filtering/Guard | |
| TC/Root Protect | |
| Loopback detection | |
| 802.3x Flow Control | |
| LLDP, LLDP-MED* | |
| VLAN | Supports up to 4K VLANs simultaneously (out of 4K VLAN IDs) |
| MAC/Protocol-based VLAN | |
| Access Control List | L2～L4 package filtering based on source and destination MAC address, IP address, TCP/UDP ports |
| IPv6 ACL* | |
| Security | AAA* |
| Port Security | |
| DHCP Snooping | |
| IP-MAC-Port Binding | |
| ARP Inspection | |
| 802.1x and Radius Authentication | |
| SSH v1/v2 | |
| SSL v3/TLSv1 | |
| Broadcast/Multicast/Unknown-unicast Storm Control | |
| Dos Defend | |
| IPv6 | Dual IPv4/IPv6 stack |
| Multicast Listener Discovery (MLD) Snooping | |
| IPv6 neighbor discovery (ND) | |
| Path maximum transmission unit (MTU) discovery | |
| Internet Control Message Protocol (ICMP) version 6 | |
| TCPv6/UDPv6 | |
| IPv6 Applications | DHCPv6 Client |
| Ping6 | |
| Tracert6 | |
| Telnet (v6) | |
| IPv6 SNMP | |
| IPv6 SSH | |
| IPv6 SSL | |
| Http/Https | |
| IPv6 TFTP | |
| Management | Web-based GUI and CLI management |
| SNMP v1/v2c/v3,compatible with public MIBs and | |
| TP-LINK private MIBs | |
| RMON (1, 2, 3, 9 groups) | |
| CPU Monitoring | |
| Port Mirroring | |
| Firmware Upgrade: TFTP & Web | |
| System Diagnose: VCT | |
| SYSLOG & Public MIBS | |
| Dual Image | |
| *These features will be supported in a future firmware release. | |
| OTHERS | |
| Certification | CE, FCC, RoHS |
| Package Contents | T1700G-28TQ |
| Power Cord | |
| Installation Guide | |
| Resource CD | |
| Rackmount Kit | |
| Rubber Feet | |
| System Requirements | Microsoft® Windows® XP, Vista™ or Windows 7, Windows 8/8.1, MAC® OS, NetWare®, UNIX® or Linux. |
| Environment | Operating Temperature: 0℃~40℃ (32℉~104℉); |
| Storage Temperature: -40℃~70℃ (-40℉~158℉) | |
| Operating Humidity: 10%~90%RH non-condensing | |
| Storage Humidity: 5%~90%RH non-condensing | |
Ако притежавате този продукт и имате впечатления за него, моля споделете ги!
Задайте своя въпрос относно TP-Link T1700G-28TQ, JetStream 24-Port Gigabit Stackable Smart Switch with 4
виж всички суичове
